- Home
- Products & Accessories
- Service & Support
- Client List
- Contact Us
- FAQ's
- Downloads
- Compliance
P. +61 (08) 9302 3200
F. +61 (08) 9302 3400
E.
E.
Unit 2, 79 Achievement Way
Wangara
Western Australia 6065
Download Architects Manual
|
|
|
Installs in under a minute and includes drawings (in PDF and/or CAD), specification sheets and sample installations. Windows users click here to download your architects manual. |
Download the FD20 PDF Brochure
Don't have Adobe Acrobat Reader?
Download it here
Gilgen FD 20 SWING Door Operator
Supplied and Installed by Rubek
Modern - Quiet - Strong
"built to survive WA conditions"
Benefits
This high-performance, low-noise electromechanical
drive mechanism is suitable for both lightweight internal
and heavyweight external doors with high wind
loads and heavy footfall. Its design is vandal-resistant,
making it suitable for any location.
-
Compatible with single/two-leaf doors and interlock accesses
-
The integrated load function can withstand winds of up to 80 km/h
-
Controlled, spring-actuated closure with motor assistance
-
The drive mechanism has a built-in travel stop
-
Test-approved "inverse" power-down opening function to let smoke escape and act as an emergency exit
-
Freely selectable Full Power and Low Energy functions in a single drive mechanism
-
Terminals for connecting accessories such as locks, security / safety elements or operating controls
-
Voltage-free outputs for acknowledgements to, for example, the building management system (via relay PCB)
-
TUV approved and complies with the pertinent standards and requirements (e.g. EN 16005, DIN 18650)
Range of application
-
Max. door leaf weight 250 kg
-
Door sizes single-leaf 750 - 1600mm
-
Door sizes two-leaf 1500 - 3200mm
-
Max. opening angle 105 degrees
-
Max. wind speed 80 km/h (320 Pa)*
*depending on door size and type of rod
Dimensions of drive system
-
Height 95 mm
-
Width 690 mm
- Depth 120 mm
Warranty Information
|
Parts |
1 year |
|
Labour |
1 year |
Maintenance
-
Once
per year is sufficient for most installations. Twice a year is recommended for
very busy doorways.
-
Rubek
can offer factory maintenance programs to suit your needs if required, just
call our service team on (08) 9302 3200 for free advice and assistance.
Possible Applications
|
|
|
|
|
|
|
|
|
|
|
|
The Gilgen FD 20 withstands high wind-load stresses
|
The Gilgen unit for swing doors is capable of reliably opening and closing doors even if exposed to wind speeds of up to 80 km/h (320 Pa). For external doors, Gilgen Door Systems recommends to assume a wind pressure of at least 100 Pa 45km/h). Doors installed in certain exposed locations(e.g. near the sea, in mountainous regions, on observation platforms, etc.) are often subject to higher wind loads. The data in the following tables correspond to fully-secured doors with safety-sensor systems. The presented application limits result from windload, door size and type of rods. |
|
|
|
|
|
|
Technical data
|
|
|
|
Double Door Installations
|
|
Drawings
Australian Compliance
Rubek fully complies with all the legal requirements for automatic doors
|
Type |
Rubek |
Requirement |
|
Building Code Australia (National
Construction Code) |
Compliant |
Mandatory compliance |
|
Australian Standard AS1428 |
Compliant |
Mandatory compliance |
|
Australian Standard AS NZS 61558 |
Compliant |
Mandatory compliance |
|
EMC N10882 |
Compliant |
Mandatory compliance |
|
Australian Standard AS5007:2007
(Guideline) |
All Rubek products exceed all aspects
of safety and endurance |
Non-mandatory (Guideline only) |
Home | Products & Accessories | Service & Support | Client List | Contact Us | FAQ's | Downloads | Privacy | Compliance
©
2025. Rubek Automatic Doors. All Rights Reserved.