The Rubek Structural model ensures a low maintenance future and low costs as it is without doubt the strongest and most reliable automatic sliding door operator in Australia.

Suitable for all applications but built specifically for large doorways carrying all door types.

Design

Designed and made in WA with Smart Electronics that set our safety levels above the current Building Code requirements and Australia Standards and guidelines.

Smart

Smart because we keep it simple. Any service personnel can look after your Rubek door operator keeping costs down because our clients are not tied to one service provider.

Smart because all the parts are individually replaceable - which saves you money over other brands that replace modules.

Power

Back-up Uninterruptible Power Supply to ensure in excess of 2200 operations in the event of a mains power failure with options to expand

Value

No inbuilt obsolescence in any Rubek operator. We avoid expensive modular replacement systems and instead design so all individual parts can be replaced. In fact we can still service operators as far back as the original installations in 1994. In terms of quality and product longevity no other automatic door company comes close to Rubek.

Confidence

When you chose a Rubek product you have the confidence that your decision is based on 25 years of success for that same product. It's true that some other brands have been around longer but not one has a product set that dates back to 1994. Typically some other brands products are obsolete within 5 to 7 years.

Expandable

If you need added monitoring or control - no problem. Rubek designed operators are adaptable to your specific needs.

Communication

Provided with a main interface board allows easy interfacing to new or existing systems. Whether its Security, Fire, Building Management Systems or SCADA our operators can be connected.

Security

With Rubeks secure motor locking system you can be assured your property is safe when locked. And if an emergency should arise you are 100% guaranteed that our locks will not fail to release and will therefore always allow safe egress as required by the BCA.

Safety

Fully compliant to the BCA/NCC - the ONLY legal requirement for automatic doors.

Meets or exceeds all aspects of safety from AS5007:2007 guidelines.

Parts

2 years

Labour

1 year

Operator housing

Lifetime (when installed as per drawings)

Typical locations

External building doors

Internal heavy doors

Room partitions

Cool rooms

Car showrooms

Airports

Shopping centres

Office blocks

Hospitals

Banks

Service stations

Government building

Single, Double or Telscopic doors

Features

-     Heavy duty 6mm extrusion designed to last the life of the buildings they are installed in.

-     Double bolted carriage rails with deep extrusion so doors remain safe and can't drop.

-     Framed or frameless doors to 600kg as standard.

-     6mm gusseted anti-rise bar that won't buckle so no door derailments and expensive housing replacements.

-     6mm steel door hanger brackets which won't bend under load.

-     5mm steel drive brackets which won't twist under load.

-     60mm nylon polychloroprene wheels with sealed bearings for smooth quiet operation.

-     15mm and 20mm Kevlar reinforced drive belt rated to 1250kg and 1500kg respectively.

-     Large 7Ah 12Vdc battery backup for continuous operation and security when the mains power is out. Additional batteries can be added.

-     Easy screwdriver adjustment of operating parameters.

-     Suitable for framed, frameless, or timber doors.

-     Accepts all control inputs with outputs that make it easy to monitor.

Perth Airport Terminal 3 Concourse

5.5m long ~500kg Door

11m long ~200kg Structural Operator

Ask about our optional Heavy Duty 6mm Structural end plates for end to end mounting as shown on the right hand side in this sample. Standard 3mm end plates are on the left hand side as a comparison. This is the only operator that can be just end mounted in Australia. Call us to see how we can help with your design.

The Rubek Structural operatot can span up to 4.5M using this method with standard doors. Rubek is the only company that can do this. This is vey useful when standard bulkhead or framing is not available or practical. Sometimes it may just be asthetically better to simply end mount. Talk to us to confirm specific details.

Self-monitoring and optimised for safety

Easy adjustments - No programmers required on any Rubek product. This allows all service personnel to make adjustments - and most importantly means the end user is not locked in to any single service provider.

Simple to read LED displays for service and diagnostics

Electronics can fail quickly in corrosive environments so Rubek offers optional corrosion protection to maximise component and circuit board life where all circuit boards, connectors and cable ends are treated to seal and keep corrosive elements out. Talk to us if you have a harsh environment and you need a door operator to last.

The PS7000 power supply also has a built in battery monitor and charger to keep battery(s) in top condition

The front panel includes LED monitoring for 240Vac, 12Vdc battery, low voltage and fuse condition

The PS7000 will automatically switch to battery power whenever 240Vac is off so that the current door operation mode whether it be normal operation or locked after hours is not interrupted.

Motor / gearbox

160W Brushed motor and matched 1:10 ratio gearbox - Dunkermotoren Germany

Lock

Fail safe electric motor lock complying to BCA/NCC (optional)

Height (overall)

260mm

Depth

153mm

Extrusion thickness

6mm. Fully gusseted for added strength

Opening and closing force maximum

130Nm

Opening speed adjustment

Variable from 50mm/s to 1000mm/s

Closing speed adjustment

Variable from 50mm/s to 1000mm/s

Hold open time

Variable from 1sec to 120sec

Maximum total door weight

500kg Single, 600kg Double

Mains supply voltage / frequency

240Vac +-10% @ 50Hz

Power consumption

126W

Fire connection

Yes

Security interface connection

Yes

DC output for external control

12Vdc

Digital read out

Yes - LED displays

Battery backup (expandable)

12Vdc 7Ah Lead acid battery

Mains fail operations

>=2200 operations & ~8 hours locking with single battery

Half open setting for doors

Yes

Panic

Yes

Low battery alarm

Yes

Power supply indicators

Yes - LED's

Self-monitoring controller

Yes

Drive

Kevlar reinforced 15mm toothed belt rated to 1250kg. 20mm 1500kg for door weight over 300kg

Steelwork

Laser cut 6mm door brackets and 5mm belt drive brackets

Sensors

BEA (Belgium designed)

Safety stop and reverse

Yes - 10 retries

Glass, timber, aluminium or steel doors

Yes

Single, bi-parting and telescopic options

Yes

Extruded 6060T5 aluminium track housing

Australian manufactured

Extruded 6060T5 aluminium pelmet cover

Australian manufactured

Extruded 6060T5 aluminium door carriage rails

Australian manufactured

Motor, gearbox and lock

German made and supplied

Controller

Western Australia designed and manufactured

Power supply

Western Australia designed and manufactured

Interface board

Western Australia designed and manufactured

Relay boards

Western Australia designed and manufactured

Steelwork

Western Australia designed and manufactured

Zinc plating

Western Australia

Anodizing

Western Australia

Powder coating

Western Australia

Fixings

Western Australia supplied

Wiring

Western Australia supplied

Reed switches

Western Australia supplied

Drive belt

German manufactured and Western Australia supplied

Sensors

BEA Belgium designed, BEA China manufacture and supplied

RBK1 Structural with framed doors with standard bulkhead mounting

RBK2 Structural frameless doors with top rail standard bulkhead wall or doorframe mount

RBK5 Structural frameless door with no rails standard bulkhead wall or doorframe mount

RBK6 frameless glass with standard bulkhead wall or doorframe mount and with sidelight panels on underside of beam

RBK22 Structural frameless glass bi-slider doors top rail hangar configuration

RBK23 Structural framed glass bi-slider doors hangar configuration

Type

Rubek

Requirement

Building Code Australia (National Construction Code)

Compliant (Exceed requirements)

Mandatory compliance

Australian Standard AS1428

Compliant (Exceed requirements)

Mandatory compliance

Australian Standard AS NZS 61558

Compliant

Mandatory compliance

EMC N10882

Compliant

Mandatory compliance

Australian Standard AS5007:2007 (Guideline)

All Rubek products exceed all aspects of safety and endurance

Non-mandatory (Guideline only)